A&V Waterjet Machine Maintanance Knowledgebase
1. 1. For Y1 and Y2 axes (or Y axis for 6*3 machine) and X axis, unscrew the axis cover(s) from the cutting table like shown in the picture.
...
Sat, 4 Apr, 2015 at 10:00 AM
Thu, 2 Apr, 2015 at 9:22 PM
A&V Waterjet Garnet Feeding System User’s Manual
The garnet feeding system is like shown in the picture below.
...
Tue, 2 Jan, 2018 at 1:46 PM
Remove the feed line and blow it out with the air gun. Be sure to close your eyes when you do this, because that sand may get everywhere. If the clog has rea...
Wed, 11 Mar, 2015 at 8:31 PM
1. Shut
down the computer, turn off the power and unplug (PLEASE REMEMBER) all wires connected to the computer box.
2. Put
the computer box in a ...
Sat, 28 Mar, 2015 at 9:01 PM
***It is suggested to always to do a dry run prior to cut a new part. Below steps summarize how to get it done.***
1. Get to the control software ma...
Fri, 27 Mar, 2015 at 10:36 AM
Problem Description: Sometimes on the bottom part of the main screen, it shows warning message in red - Driver turn off or Alarm! For all users of ...
Fri, 19 Mar, 2021 at 2:54 PM
Σ-5 Series AC Servo Drives https://www.dropbox.com/s/tlm4slks4uda389/%CE%A3-5%20User%27s_manual_for_drivers%20%20new.pdf?dl=0 Σ-7 Series AC Servo Driv...
Fri, 19 Mar, 2021 at 2:54 PM