A&V Waterjet Machine Maintanance Knowledgebase
You can make your own drawings. The larger the better. In waterjet software, F7- change unit to metric. Download the attached file 1000_500.dxf L...
Fri, 6 Nov, 2020 at 10:18 AM
The high pressure is set by A&V Waterjet technician during installation or default by manufacturing company. Following steps show you how to adjust it m...
Tue, 15 Jun, 2021 at 10:05 AM
1. 1. Unscrew the cutting head from the cutting body.
It looks like the picture shown below.
2. 2. Unpack the new
orifice from yo...
Wed, 1 Apr, 2015 at 7:03 PM
Look at the two gauges on the A&V pump shown
below.
Gauge A displays the inlet water pressure from 0 to 1 MPa (145 psi).
Gauge B dis...
Mon, 30 Mar, 2015 at 7:16 PM
1. Unscrew the nozzle nut from the cutting head (not necessary to take the cutting head off). It looks like the picture
shown below.
2. Take
...
Wed, 1 Apr, 2015 at 2:49 PM
Please refer to the attachment.
Wed, 1 Apr, 2015 at 7:53 PM
1. 1.Unscrew the erroneous cutting head from the cutting
body. Also unscrew the nozzle nut so that you can take off the nozzle.It looks like the pictu...
Tue, 7 Apr, 2015 at 8:15 PM
number trouble Blink frequency (1 times/sec.) interval time (sec.) 1 emergency stop On and no blinking no check whether emergency stop ...
Thu, 8 Jul, 2021 at 11:56 AM
1. Take off the fastening screw
2. Take off the belt
3. Take off the step motor
4. Take the new motor with hand
5. Put the belt on the bigg...
Fri, 3 Apr, 2015 at 9:09 AM
1.What is losing pressure? How to solve that? 2.How to solve losing pressure? (repair check valve assembly) Glass, 400,800,1500 mesh sanding shee...
Fri, 14 Aug, 2020 at 3:40 PM