A&V Waterjet Machine Maintanance Knowledgebase
We are updating old outlet poppet to new outlet poppet and seats This new style poppet works with two other parts like following picture ...
Mon, 22 Mar, 2021 at 10:26 AM
Symptoms Cause/Solution Waterjet machine has low pressure while the intensifier shifts normally 1. Check if there is any leaki...
Thu, 8 Apr, 2021 at 12:25 PM
Z- axis Height Adjustment Instruction
Problem description
If after installation, the cutting head cannot be moved to a
proper...
Thu, 13 Oct, 2016 at 8:41 AM
Maintaining your waterjet
Modern equipment is easier to maintain than even just a few years ago, and also requires much less maintena...
Sun, 8 Mar, 2015 at 4:07 PM
High Pressure Tube Replacement
Instruction
Problem description
When changing HP
(High Pressure) tubes, due to the differences between tube m...
Tue, 7 Apr, 2015 at 8:15 PM
Warranty for cutting table &
controller
The product provides the warranty
period of one year or 1,000 hours of work. If one of the items first...
Thu, 2 Apr, 2015 at 9:21 PM
The
supplier shall be liable for defects as follows:
1. All parts or
services that exhibit a defect within the period of limitation- without rega...
Mon, 9 Mar, 2015 at 10:19 PM
Waterjet CNC cutting table trouble shooting
Symptom
Possible Causes
Solution
Cannot open control software
Waterjet control software Er...
Wed, 11 Jan, 2017 at 9:35 AM
Thu, 2 Apr, 2015 at 9:22 PM